READY TO RUN LOCOMOTIVES - PARTS - DRIVE SYSTEMS - GEARMOTORS - SOUND SYSTEMS - WIRED CONTROL SYSTEMS - WIRELESS 2.4ghz RADIO CONTROL SYSTEMS
Custom fabrication of track, turn out switches, signals, bridges, other structures and installation is available upon request.
We ship worldwide and will be happy to discuss any special shipping or delivery needs you may have.
100% Steel Bullet Proof Switcher Diesel Locomotives
Semi Assembled Kit
- ALL Machine work is 100% complete
- CR-1018 Steel Bare Metal
- Fully formed and welded Hood
- Fully Formed and welded Cab
- All electronics and wire harness included.
BARE METAL - Ready for powder-coating.
Ready to Run - Fully Assembled & Tested.
Includes the following,
- 2 AGM Batteries
- On-Board Charger
- Hour meter
- LED Headlights with HIGH & LOW
- Horn
- Pre-wired for Bell (bell not included)
- Pre-wired to accept a full sound system - (sound system not included)
FULL 2 Year Zero Deductible Warranty
Customer only pays shipping fees.
100% Steel Bullet Proof Switcher Diesel Locomotives
Semi Assembled Kit.
- ALL Machine work is 100% complete
- CR-1018 Steel Bare Metal
- Fully formed and welded Hood
- Fully Formed and welded Cab
- All electronics and wire harness included.
BARE METAL - Ready for powder-coating.
Ready to Run - Fully Assembled & Tested.
Includes the following,
- 2 AGM Batteries
- On-Board Charger
- Hour meter
- LED Headlights with HIGH & LOW
- Horn
- Pre-wired for Bell (bell not included)
- Pre-wired to accept a full sound system
- (sound system not included)
FULL 2 Year Zero Deductible Warranty
Customer only pays shipping fees.
Add the finishing touch to your locomotive.
Complete PLUG AND PLAY (PNP) Sound System
with 2 speakers, Amplifier, & full wire harness.
$995.00 Complete PNP Kit.
$1290.00 INSTALLED when a new RTR locomotive is being built.
Complete powder coat finish of the locomotive chassis , cab and hood. Your choice of any 2 primary colors.
Chassis - Typical color is BLACK.
Cab & Hood - Any SINGLE primary basic color for both pieces.
$490 - for 1.6 Inch scale BPS
$590 - for 2.5 Inch scale BPS
All the little extras ...
6.5 inch Round Speakers with Box (one pair)
$80
Phoenix Sound - Programming Cable
$130
200 Watt Amplifier 2 Channel
$60
8 inch Sub-Woofer with Box (single speaker)
$120
400 Watt Super Tweeter
$130
7 band passive Equalizer
$145
Phoenix Sound System Board - BOARD ONLY
( pre-programmed for ride on set up )
$340
600 Watt Amplifier 2 Channel
$270
Phoenix Sound PB-11 / PB-17
Complete Plug-N-Play Module
$550
Complete PLUG AND PLAY Sound System
with 2 speakers, Amp, & complete drop in wire harness
$995
Basic 12 Volt Low Amp draw HORN
$20
300 Amp Battery Disconnect Switch
(with removable plastic key)
$20
3 Amp DC-DC Converter
Converts 12 volts down to 3 volts
(Designed for LED headlights only )
$20
3 Amp DC-DC Converter 12 Volts to 4.5 Volts
( Designed for LED headlights only )
$20
9-15 Volt Low Amp LED Ditch Light Circuit
$20
12/24 Volt Input Dimmer (8 amp/90 watt max)
$30
Digital Volt Meter - Blue or Red Illuminated
$35
100 Amp Breaker with Automatic Reset
$65
150 Amp Breaker with Manual Reset
$85
Custom Made Hand Held Controllers by PRP
Small Switch Sub-Micro Size (on/off)
$5
Latching Micro Switch (on/off/on)
$5
Momentary Micro Switch (on/off/on)
$6
Main Power Switch, with Bezel
$7
Extra Trigger Switch (for any add on accessories)
$19
Throttle Potentiometer (Avionics Grade)
$19
Air Brake Switch (requires new face plate for the ~Hand Held Control Box)
$19
New Face Plate with BRAKE & RELEASE
$29
Rotary Volume (added to any controller)
$55
Joystick Throttle/Direction Module
$295
Assembly labor
$260
Held Control Box Kit
(Referred to as a "PENDANT" or "TILLER")
$455
Hand Held Control Box Kit (with joystick)
That varies both throttle and direction simultaneously, returns to off in the center.
$660
Super Duty & PDMC Motor & Controller Kits
Super Duty Motor & Controller Kit
$2395
Super Duty "Plug and Play" (pre-assembled)
$2895
2 x 350 Watt Motor Gear Units
140 Amp Controller, Harness & Hand Held Kit
$1695
4 x 350 Watt Motor Gear Units
200 Amp Controller, Harness & Full Hand held Kit
$2295
For 6 or more motor-gear units per locomotive, please contact us for a custom quote.
Copyright © 2022 Precision Railroad Products - All Rights Reserved.